Lessons I Learned From Info About How To Build A Straight Fence

Build a fence you can be.

How to build a straight fence. Start with a straight line. Using the temporary fence or property lines, measure three feet down the line to the left, and mark the spot with a stake. In my previous videos, you learned how to make your post holes straight, so in this one, we are standing up the posts and making sure they are vertical on bo.

Then follow the same process to make a straight line out 100 feet along that compass bearing. If sighting doesn't get it straight enough for you, stretch the top wire between the first and third post, move the third until the wire just touches the second post. Repeat until the second end.

Nail the first fence board. In my opinion, the biggest challenge in building a fence is keeping it in a straight line. It's not hard, you just need to follow a few easy steps.

Drive screws into the two. Measure the positions of the posts with a tape measure, and drive a stake at each. Start at the corner again, and now measure four feet.

Then, of course, you need materials that last long and look good doing it so, i got. Begin by installing the pickets on the exterior side of the fence. And that starts with a solid anchor.

Stretch mason string between the centers of all the batter boards to delineate the perimeter of the fence. You can keep your pipe fence straight by using pipe clamps. Standard post caps for your posts, and panel to post connection screws, powder coated.

Fences are even less forgiving. Pipe clamps are devices that you attach to the pipe and then use to hold the pipe in place while you weld it. Creating lines that are straight 1.

Bolts for welded plated, surface mount posts.